The
easiest way to restore or change the color of leather, carpet, plastics
or metal in cars, boats, or motorcycles.
Colorbond
can be used on dash panels, seats, instrument panels, steering
wheels, airbag covers, convertible tops, mirrors, exterior trim--virtually
anywhere on a car or boat. Colorbond penetrates the
surface of leather, vinyl, ABS, PVC, polycarbonate, polyurethane,
Lexan, thermal plastic urethane, metal, and (TPO) polypropylene,
and forms a molecular bond that restores or changes the color
permanently. Colorbond is dry to the touch in 45 seconds, and
bonds within 10 minutes. The vehicle can be used within minutes
of application. Colorbond is UV stable, will not crack, flake,
or peel, and the grain simulation is never altered or hidden,
no matter how many times Colorbond is applied. With Colorbond,
the suppleness or "hand" is never affected, and it
does not become stiff or brittle. A base and tinting system
is also available so that an OEM color match is achieved every
time. Colorbond is easy to use, and, in many cases, is a one-step
process.
Sprays on easily, dries quickly, deep-penetrating color forms a permanent
bond to dashboard, console, ceiling, door trim, smooth-stretched fabric,
you name it. Color is abrasion resistant , flexible and it won't fade.
Not for use on fabric seats.
Features
& Benefits:
COLORBOND
penetrates the surface of leather, vinyl, ABS, PVC, polycarbonate,
polyurethane, lexan, thermal plastic urethane, metal, and (TPO)
polypropylene, and forms a molecular bond that restores or changes
the color permanently.
COLORBOND
is dry to the touch in 45 seconds and bonds within 10 minutes.
The vehicle can be used within minutes of application.
COLORBOND
will not crack, flake, or peel.
The grain
simulation is never altered or hidden, no matter how many times
COLORBOND is applied.
The suppleness
or "hand" is never affected and does not become stiff
or brittle.
A base and
tinting system is available so an OEM color match is achieved
each and every time.
COLORBOND
is easy to use. In many cases COLORBOND is a one step process.
COLORBOND
is UV stable.
COLORBOND
can be used on dash panels, seats, instrument panels, steering
wheels, airbag covers, convertible tops, mirrors, and exterior
trim. Virtually any where on a car or boat.
COLORBOND
is OEM approved and used by The Ford Motor Company.
Application
Tips:
You
can apply COLORBOND to most materials in 2 to 4 easy steps.
See the chart below for instructions for most materials.
(Each can of COLORBOND Leather & Vinyl Plastic Refinisher covers
approximately 4 square feet)
MATERIAL
Step
1
Buff lightly
with 1,500 wet dry
sandpaper
Step
2
Clean with
Acetone
Step
3
Using ColorBond
Adhesion Promoter
apply mist coat
then apply heat at
140 F for 10 minutes
Step
4
Apply
3 mist coats
of ColorBond
LEATHER
VINYL
ABS
POLYCARBONATE
PVC
LEXAN
THERMAL
PLASTIC
URETHANE
ACRYLIC
FIBERGLASS
TPO
METAL
MATERIAL
Step
1
Buff lightly
with 1,500 wet dry
sandpaper
Step
2
Clean with
Acetone
Step
3
Using ColorBond
Adhesion Promoter
apply mist coat
then apply heat at
140 F for 10 minutes
