BD
Diesel Performance has done it again, with another 12 valve cummins
Turbo diesel performance upgrade. This turbine housing kit is a direct
replacement turbine housing for the 1988-1993 Dodge 5.9L Cummins turbo
to give better bottom end response, quicker spool time and more horsepower.
This is a great, inexpensive increase in power!
FREE
Shipping Special
Flowed
turbine housings for low and high rpm boost control to match your
engine for maximum air control. Waste gated and non waste gated housings
are available to match your high horsepower engine.
The stock turbocharger
exhaust housing on the 94-98 12 valve engine is a 12 cubic centimeter
that performs well on engines that are developing up to 250 hp.
Once you are above this rating, the exhaust flow is so high that
the stock housing offers a high drive pressure that prevents the
boost pressure from entering the combustion chamber. We have a 14
cubic center meter waistegated housing that will handle this extra
250 hp + exhaust volume and reduce the amount of drive pressure
required to turn the turbine wheel.
In the 1989/90
5.9 6BTA Cummins a 18 cubic centimeter housing is a little to large
and the turbo lag can be eliminated with a 16 cubic center housing.
The 91-93 engines
have a 20 square center housing and turbo lag is quite obvious.
By installing the non-waste gated 16 square centimeter housing,
higher boost pressure and our larger injectors can pump the engine
up to a 210 hp engine with 22 pounds of boost pressure.
Product Warranty
1-Year Parts Product Rating
Part #1045910 Turbine
Housing, 16cm - 1988-1993 Dodge
Legal
in California only for racing vehicles which may never be used upon
a highway
Product
Description
Part
#
Cost
Quantity
Order
Buy
from a experienced diesel performance and repair company, call us toll free
at 866-737-4966, we give free advice.
Pictures
of our new Shop
