Eliminates
clogging of the EGR valve and soot build-up in the intake.
Lower
EGT and coolant temperatures
Increases
bottom end response
Eliminates
the recirculation of corrosive exhaust gasses into the engine
Prolongs
engine life
NOTE:
This product CAN NOT ship to California due to CARB regulations.
Our new EGR cooler delete kits for the 6.7L Dodge trucks are
now available! At Thoroughbred Diesel we also offer Dodge
6.7L EGR delete kits and a BD
Diesel 6.0L Ford EGR delete kit at excellent prices.
Call us at 866-737-4966 for free
EGR delete kit advice.
These kits include
EGR valve block off plates, EGR cooler block off plates, gaskets
and hardware. Also included are the exhaust cover and intake
cover supports to allow re-installation of the engine cowling
and a support bracket for the existing coolant tube to prevent
vibration.
The kits features
an all aluminum and stainless design. The EGR block off plate
is also pre-tapped for an EGT probe, so you do not have to
drill and tap the exhaust manifold.
BD
Part # 1090011
Our Part # BDD1090011
Dodge Cummins 6.7L 2007, 2008
BD
Part # 1090012
Our Part # BDD1090012
Dodge Cummins 6.7L
2009, 2010, 2011
Benefits
of deleting the EGR Cooler and Valve:
Eliminates
future EGR cooler failures
Eliminates
clogging of the EGR valve and soot build-up in the intake.
Lower
EGT and coolant temperatures
Increases
bottom end response
Eliminates
the recirculation of corrosive exhaust gasses into the engine
Prolongs
engine life
Product
Warranty
1 Year Parts
* Only legal for use in racing vehicles which may never be used
upon a highway
- Electronic
tuner capable of optimizing DTC's is required.
- Product for off-road or legal racing/competitions use only
and may not be legally used on public highways or streets.
NOTE:
This product CAN NOT ship to California due to CARB regulations.
Product
Description
Price
Order
DPF
/ EGR Removed Warning!
THIS
PRODUCT MAY BE CAPABLE OF DISABLING ALL OR PART OF THE EMISSIONS
SYSTEM ON CERTAIN VEHICLE APPLICATIONS, WHEN SELECTED BY THE
END USER TO DO SO. EMISSIONS REMOVAL IS NOT LEGAL ANYWHERE WITHIN
THE USA, UNLESS THE VEHICLE IS NOT REGISTERED WITH THE DIVISION
OF MOTOR VEHICLES, AND IS BEING USED SOLELY AS A COMPETITION
RACE VEHICLE. BY SELECTING ANY SETTINGS THAT CAN ALLOW REMOVAL
OF EMISSIONS EQUIPEMNT, YOU ACCEPT ALL RISK AND LIABILITY ASSOCIATED
WITH ITS USE, AND AGREE TO THE FOLLOWING TERMS AND CONDITIONS.
1.All
settings or calibrations that may allow emissions removal are
intended and developed for off-highway, organized, sanctioned,
closed-course RACE/COMPETITION USE ONLY! Any other use, on ANY
road, public or private, within the USA, is STRICTLY PROHIBITED.
2.We insist that you do not select any calibrations or settings
if this vehicle has been registered or certified for highway
use within the USA.
3.This product when used incorrectly may violate local, state,
and federal laws pertaining to emissions, traffic, registration,
and safety.
4.Use of this product may damage or destroy mechanical and/or
electrical components of this vehicle.
5.Use of this product may void or nullify the vehicles factory
warranty.
6.User understands that motorsports are dangerous, and that
installation of this product may subsequently require special
driving skills or techniques to safely operate the vehicle.
7.User assumes sole responsibility for the safe, proper, and
legal use of the vehicle at all times.
8.The purchaser and end user releases, indemnifies, discharges,
and holds harmless Thoroughbred Diesel from any and all claims,
damages, causes of action, injuries, or expenses resulting from
or relating to the use or installation of this product that
is in violation of the terms and conditions on this page, the
product disclaimer, and/or the product installation instructions.
Thoroughbred Diesel will not be liable for any direct, indirect,
consequential, exemplary, punitive, statutory, or incidental
damages or fines cause by the use or installation of this product.
