MY03-S1
Big Bang

Big Bang Injection Stage 1 Injectors - 30% Over Stock - 03-04 Dodge Cummins (Set of 6) - MY03-S1

Thoroughbred Sku #: BBIMY03-S1
Manufacturer Sku #: MY03-S1

Your Selected Vehicle Does Not Fit, Please Select a Vehicle

Select a Vehicle

Selected Vehicle

Year/Make/Model: {{year}} {{make.Name}} {{model.Name}} Edit

Item Options:

Shipping Restrictions:
This part is NOT available to ship to the state of California.


$3,605.00

free-shipping-no-handling

Applications:

View All applications

VERIFY VEHICLE FIT

Product Details

Product Name: Big Bang Injection Injectors
Manufacturer: Big Bang Injection
Manufacturer Part #: MY03-S1
Thoroughbred Diesel Part #: BBIMY03-S1
Fitment Notes: Big Bang Injection Stage 1 Injectors - 30% Over Stock - 03-04 Dodge Cummins (Set of 6) - MY03-S1

  • 2 Year Warranty, Unlimited Milage
Big Bang Injection is making some big waves within the diesel performance industry. With their ties to the infamous Smarty line of tuners and their extreme commitment to building and perfecting the Cummins Common Rail injectors, they have made quite a name for themselves and have lived up to the reputation without flaw.

Big Bang Injection was formed at the request of accomplished engine software tuning guru Marco , of MADS Electronics, SMARTY fame. After extensive testing and research of existing aftermarket performance injector options, none were found to be built to an acceptable standard, when utilized in an extreme performance application. Marco clearly saw a need in the aftermarket, for a top shelf injector with consistencies, tolerances and calibrations, as good as, and better, than OEM quality.

Unable to locate a suitable existing product, Marco sought out, the best of the best, leaders in the field of Common Rail Fuel Injection Technology. Two years later, after thousands of dynamometer runs, and tens of thousands of street driven miles, BBi is READY. Big Bang Injection has come to market with every intention to dominate.

Each injector set is built with new components and are tested against one another to flow within 2% tolerance of each other to deliver even distribution across the cylinders. Every injector is also further tested to ensure an exacting spray angle, as well as equal hole size and pattern to deliver consistent fuel distribution within the piston bowls for a complete combustion. Further, BBi sought out to correct some of the short falls of the Cummins Common Rail injector that caused premature failures. Not only have they accomplished such a feat, but they have identified and cured the common injector rattle issues that have plagued them for years. That's correct, these injectors will NOT rattle like every other common rail injector on the market.

You will also notice that these injectors do NOT require a core charge like every other manufacturer. Big Bang Injection builds new injectors and does not reuse injector parts that are known to fail, hence, why would they want your cores back like everyone else?

These Stage 1 injectors from BBi are built to flow an additional 30% over your stock injectors. The nozzle flow rate of each injector is set to 78 l/h at a pressure of 100bar, in comparison to the stock injectors that flow at 60 l/h/100bar. Even though these injectors are claimed as "Stage 1," they are still capable of a whopping 700 rear wheel horsepower, while being VERY streetable.

For those that will be running the engine at higher RPM's, we also offer these injectors with the same high RPM internal modifications that the Stage 4 Competition injectors carry. The High RPM modifications are specifically targeted at delivering enhanced throttle response and maximum performance at high RPM's for competition use.

  • 30% Over Stock
  • Set of 6
  • High line NEW injectors have a failure rate of less than 0.1%


Reviews

There are no Questions to display