Banks Bullet Diesel Tuner

Gale Banks Engineering has introduced the Banks Bullet™, a budget-priced, entry-level diesel tuner/boost gauge for ’01-04 Duramax LB7, ’03-07 Cummins and ’03-07 Power Stroke pickups. The 2” gauge-mount device has Stock, Tow, and Sport power levels, which are changeable on-the-fly at the push of a button. Banks Bullet adds up to +60 hp and +100 lb-ft at the rear wheels, offers built-in AutoRate® and ActiveSafety® safeguards, and stacks with any aftermarket chip or programmer.

An all-in-one tuner and control panel, Banks Bullet displays boost, percent of fuel increase, self-diagnostics and power level. The display options are user-selectable. An optional thermocouple kit adds EGT (exhaust gas temperature)-reading capability and provides temperature-limiting safety, automatically limiting fuel delivery based on the user-selected maximum EGT, from 800-1500° in 50° increments. A warning flashes when the temp limit is approaching. Banks Bullet is easy to install and designed to integrate seamlessly with the vehicle’s electronics without interference.

2-Year Ltd. Warranty

Power

Three power levels:
TOW adds about 30 hp; SPORT adds about 60 hp. Power adjustable on-the-fly.

Boost

The Bullet is also a Digital Boost Gauge. A separate setting lets you select a boost level that will trigger the visual alarm (a red LED). Adjustable from 20-50 PSI in 1 PSI increments.

Fueling

FUELING percentage displayed. Stock is always 100; higher numbers are stock + additional fueling from Banks Bullet. (140 indicates 40% more fuel delivery with Banks Bullet.)

EGT

Requires thermocouple upgrade. The optional thermocouple equips the Bullet with adjustable temp limiting control. Set the temp limit and save your engine! Fueling limits are adjustable from 800-1500° in 50° increments. Exceeding the set EGT limit by more than 50° will trigger the visual alarm.

Easy Mounting & Installation

The size of a standard 2" gauge, Banks Bullet can mount anywhere a gauge can go. Includes a single-gauge instrument mounting panel.

Optional pillar-mount available (shown - orderable below).

NOTE: "Legal in California only for racing vehicles which may never be used upon a highway"

• Mounts on A-pillar
• Allows wires and tubes to be cleanly routed for finished look
• 2-gauge configuration with partial-pillar covers or 2- or 3- gauges with full-pillar cover for seamless, "built-in" appearance
• Optional provision for factory speaker
• Gauges sold separately, or included with some Banks power system
• In addition to the 3-gauge mount, 1- and 2-gauge mounts are also available
• Available for Chevy/GMC Trucks, Dodge Trucks and Ford Trucks