CP3 systems are the best in the industry when flowing the
volume of fuel needed to support high horsepower applications.
Supplying the fuel for high horsepower needs!!
Twin CP3 Fuel System
The CP3 High Pressure Fuel Injection Pump on the
Duramax Engine is the key to power. Today's performance electronics
can give you a lot of power through increased amounts of fuel
being delivered into the engine at an optimized time. However,
many aftermarket power-makers have the ability to command
more fuel to be delivered, at a higher pressure, than the
Duramax stock fuel pump can physically provide. When the CP3
falls behind, you're not getting 100% of the power that those
other modifications are capable of providing. This "performance"
issue is made even more critical through the use of high flow
fuel injectors. Only The ATS High Performance Twin CP3 Injection
Pump kit is capable of delivering the fuel required for big,
Twin CP3 Injection System
The Twin CP3 System incorporates a second CP3 injection pump
and all the brackets needed to mount it on the engine, where
it will provide a constant fuel supply. Regardless of the
extra fuel demands placed on the pumps by performance electronics
or injectors, you will not fall short on fuel again! A must
for any truck owner looking to make power & get the most
out of their other modifications!
CP3 Injection System
The ATS system is a clean bolt-on kit, including a secondary
high-performance CP3 Injection pump, a billet pulley wheel
for the second injection pump, all the necessary fuel lines
and supporting hardware and a new belt to drive it all. You
also get an electronic controller to integrate everything
seamlessly. This kit is engineered to have perfect fuel control
from idle to maximum RPM!
always, it is critical to support higher levels of power with
upgrades to the drive-train.
CP3 Kits Offer:
fuel volume at commanded rail pressure
pulley wheel allowing for max flow out of secondary CP3
high pressure fuel lines instead of tapping into the factory
factory fuel pressure relief valve for safe operating parameters
internal diamater high pressure fuel lines than factory
and the competition