08-2010 Ford Part # 46-20071
- MDV® technology for optimum airflow
- Massive 3.15" bar and plate core for greater heat
transfer (Compared to Banks 2.75'' tube and fin core)
- 3/16" thick end-tanks for greater allowable boost
- Direct replacement, no modifications required
- Fully welded aluminum end-tanks with MDV® technology
- Bar and plate core allows more flow area per cubic inch
- Rated for 200 psi boost pressure
- Rated for 1000 + hp
- Lower EGTs by100º F
- Less pressure loss
- 200º F temperature drop across intercooler
- 74% Increased airflow over stock
new Bladerunner Intercooler represents the next generation of
intercoolers. The Bladerunner intercoolers utilize a 3.15" bar
and plate design that is 15% larger than the competitors and
outflows OE style tube and fin core designs by 74%! This design
results in quicker and more measurable heat dissipation. The
unique Bladerunner end tanks are constructed out of 3/16' TIG
welded aluminum plate tanks that incorporate three multi-directional
vanes that efficiently direct air flow through the entire core
for maximum cooling.
Multi-Directional Vane Technology: The patented
BladeRunner MDV technology is used to direct hot air flow through
the entire intercooler core. This allows for greater cooling
than competitors units.
3.15" Bar and Plate Core Design: The bar and
plate core design allows for greater airflow and increased heat
dissipation over the much smaller tube and fin design used by
the OEM and other aftermarket brands.
Multiple Auxiliary Ports: Four tapped 1/8"
ports are supplied for easy installation of gauges, temp sensors
or nitrous oxide systems.
Billet Aluminum Inlet/Outlets: Each BladeRunner
Intercooler uses billet aluminum inlets and outlets for superior
strength and durability.
Tig-Welded: 100% TIG-Welded by certified craftsmen
for race proven strength and durability. TIG-Welding provides
the strongest welds reducing stress cracks.
Every Bladerunner Intercooler is tested at 200psi which is perfect
for high boost applications. In recent testing the Bladerunner
intercooler produced a 200 degree temperature drop at the intercooler
and a 100 degree EGT (Exhaust Gas Temperature) drop as well
as increasing air flow by 74% over stock. This intercooler also
outflowed the Banks unit by 25%.
Don't waste your time and money on modified factory intercoolers.
Invest in the aFe Bladerunner intercooler, the most sophisticated
intercooler design on the planet.
*Legal in California only for racing vehicles which may never
be used upon highway.
Weight: 70 lbs
with confidence! Thoroughbred Diesel is a authorized aFe Power
dealer. We stock a full line of aFe with prompt shipping. Call
us at 866-737-4966.