more annoying TPMS warning lights on your 6.4L powerstroke!
2008-2010 6.4L Powestroke trucks come equipped with a Tire Pressure
Monitoring System (TPMS). This system has a wireless transmitter
mounted inside each tire that senses pressure. This pressure
measurement is monitored by a computer in the cab and will cause
fault lights to illuminate if the tire pressure gets out of
a calibrated range, or a problem exists with one of the sensors.
This becomes a problem when non OEM tire and wheel combinations
cannot support the required factory pressure calibrations of
the TPMS system. Or for those wanting to run two different sets
of tires/wheels during different driving conditions.
once again pioneers the industry by releasing a tool to allow
the end user to adjust the TPMS parameters. This has never
been done by an aftermarket company before. With the H&S
TPMS module you have full control over the system, allowing
you to change pressure thresholds or completely shut the system
This module will plug in-line with your existing H&S tuning
device ONLY during TPMS adjustment. Once TPMS adjustment is
complete, it can be removed. Your H&S device will need
to have TPMS compatible software installed. Make sure your
H&S product is up to date by vising the H&S downloads
Once updated correctly you will see a "TPMS adjustment"
option in the main menu options. Use the onscreen instructions
to walk you through the programming process.
adjustment / disablement of the TPMS (Tire Pressure Monitoring
and Rear pressure independently adjustable from 0-100psi