FLO~PRO make headers?
I have to get a dealer to install my FLO~PRO kit?
- No, you can install our kits yourself. Experience isn't necessary,
but can come in handy. You'll need a sawzall, and an impact
drive as basic tools. Some kits require tighter fitting turbo
pipes which may require modifications to stock firewalls or
a little more wiggling than others. In some cases it may take
you a few hours to install a kit. Some people are more comfortable
taking their truck to someone who has installed our exhaust
systems on a regular basis.
a FLO~PRO system fit my vehicle if I have an in bed hitch or
- To be safe, we cannot guarantee it. All FLO~PRO systems are
designed to fit FACTORY vehicles with no aftermarket suspension
or in bed/gooseneck hitch modifications.
Do your kits come with a muffler?
- Our kits have different part numbers for systems that come
with muffler than those that come without. This eliminates extra
costs for those who won’t need it. If you end up experiencing
"cab drone" from your straight piped system, our mufflers
are available separately if you want to eliminate possible drone
and vice versa.
grade is your "Stainless Steel" that you use?
All our Stainless Steel exhaust systems are made from mandrel
bent 16ga T409 Stainless Steel. Stainless Steel is graded
by the amount of nickel content in the steel. The higher the
nickel content the higher quality. For example, T304 stainless
is better quality than T409 in the sense that it has a higher
polish and is nonmagnetic. T409 stainless is often prone to
some minor surface rust, but will generally outlast Aluminized
systems. All our exhaust tips and stacks are made from T304
stainless steel and will not rust.
getting a muffler restrict my flow?
- Nope. Our mufflers are designed to eliminate "cab drone".
For example, in a 5" system, the muffler has a 5"
straight through perforated core packed in an 8" case
with a high temperature fiber material. Mufflers have a case
length of either 20" or 30".
style of clamps are included in your kits?
- We like to use a 2-Bolt "Lap Joint" style of clamp.
These clamps eliminate the need to notch the pipe expansions
as each side of the clamp tightens individually on the pipes.
Because of their even force on the pipes, they do not distort
or alter the shape of your exhaust. Torque each bolt to only
50ft/lbs for a nice firm fitting seal. These clamps are also
available separately if you wish to replace the inferior clamps
from a different system.
you include tips in your systems?
- No. It's your truck, make it look exactly like you want
it to! We have a wide range of tips available from 5"
to 8" outlets, turn downs, rolled angle cuts, dual walled,
kind of warranty do you have?
- FLO~PRO has a 1 year warranty against any factory defects.
If your system is installed incorrectly which results in it
becoming damaged or other external damage is done, we can't
warranty the system. Please keep your original orders and
packing slips as reference for any warranty claims.