aFe
Cold Air Intake Systems - With Pro Guard 7 Filter (75 Series)
Shop
with confidence! Thoroughbred Diesel is a authorized
aFe Power dealer. We stock a full line of aFe with
prompt shipping. Call us at 866-737-4966.
aFe
has now combined the filtration power of their Pro-GUARD 7 air filters
with their Stage 1 and Stage 2 Cold Air Intake Systems!! To address
the need for extra protection from dust and dirt with washable/reusable
oil-impregnated cotton gauze filters, aFe developed a new filtration
technology so revolutionary that we applied for and received a patent.
This new filtration technology is aptly called Pro-GUARD 7. 5 layers
of progressively finer mesh medical grade cotton gauze with micro
fibers that attract smaller and smaller particles as air passes through
is combined with 2 layers of random-porosity non-woven synthetic polyester
fabric. This 7 layer combination of cotton gauze and non-woven polyester
is sandwiched between 2 layers of epoxy coated Aluminum wire mesh.
Because of compression ignition of diesel engines, tolerance are much
tighter than in a gasoline spark ignition engine. These tight tolerances
require clean air and lots of it. Diesel engines require 7 times more
air than a gasoline engine of equivalent size. The patented Pro-GUARD
7 filter media delivers more cool clean air needed for extended engine
life, better fuel economy and additional power.
These intake kits from aFe give your vehicle the
air it needs by replacing the restrictive factory intake system
with a high flow conical air filter, and providing isolation
from the hot engine air. There are two types of aFe intake
kits: Stage One and Stage Two. Stage One kits replace the
factory air box with a housing and conical filter assembly.
Stage Two kits replace the entire intake tract all the way
back to the Turbo or intake manifold, providing the ultimate
level of fresh, clean, cool air to boost your performance.
aFe intake
kits are also available in multiple styles:
The
CX (Classic) System, which is a closed system that completely
seals when the hood is shut (Stage 1 and Stage 2);
The
Si (Sealed Intake) System,
which is a fully sealed intake system that provides an unbelievably
tight seal (Stage 2 only));
The
EZ (Easy Install) System,
which is similar to a Stage 1 CX System, but utilizes aluminum
tubes (Stage 1 only);
and finally the XP (Extreme Performance) System,
only available as a Stage 2 type system, that includes a replacement
battery box to further increase and direct airflow...aFe's ultimate
system!! (available only for certain models).
Stop
your stock intake from holding back your performance—replace
it with an advanced system for a power boost you can feel in any driving
situation. The AFE Cold Air Intake System comes in 2 different stage
options for varying levels of seat-of-your-pants horsepower gains.
AFE Stage
1 Cold Air Intake Systems replace your stock air box and
filter with a custom-designed high-flow filter and a powder-coated
steel heat shield to keep warm air out of your manifold.
Stage
2 AFE Air Intakes go further, replacing your stock intake
tract, too. This allows for the largest, most efficient intake possible,
along with monster gains of up to 50 horsepower! And, Stage 2 AFE
Air Intakes are perfect for working with future performance upgrades,
too.
Each AFE Cold
Air Intake System includes a AFE long-life reusable filter. Both
Stage 1 and Stage 2 come ready for easy bolt-on installation in
half an hour. Plus, your AFE Cold Air Intake System is covered by
a Lifetime Warranty.
More
Horsepower/Torque
Medical grade
cotton gauze filter media reduces air restriction and increases
engine output
Surface area
optimized to reduce pressure differential across the element resulting
in reduced back pressure and increased torque
Increased
Airflow
Precision
pleat geometry optimizes airflow through intake system
Engineered
to control maximum filter face air velocity with deep precision
pleats
Improved
Engine Protection
Multi-layer
oiled cotton gauze attracts and traps contaminants without sacrificing
air flow
Sturdy epoxy
coated wire mesh construction protects filter media (and engine)
from large debris
Limited
Lifetime Warranty
Cleanable
and reusable
Urethane
seal outlasts conventional materials (especially under extreme
engine temperatures)
aFe pre-filters